New Page 1

Author Topic: Benedini TBS mini-Clark TK20E-T1  (Read 2951 times)

reyemmanuel

  • Guest
Benedini TBS mini-Clark TK20E-T1
« on: February 14, 2013, 10:31:28 PM »
Received my benedini today, and the V10 engine coupled to Visaton FRS8 is just awesome.  I am indeed a very  happy tanker.

PS. Connections and Pics are as below

Turnigy CH1--->Clark CH4
Turnigy CH2--->Clark CH3
Turnigy CH3--->Benidini TBS Mini Prop 1 in
Turnigy CH4--->Clark CH1

Benidini TBSmini Prop 1 out---->Clark CH2                          (ENGINE SOUND)
Benidini TBSmini Prop 2---->Turnigy CH6 (mapped as HOV THR (TRN)    (ENGINE REV SOUND)
Benidini TBSmini Prop 3---->Turnigy CH5 (mapped as PIT TRIM)      (SOUND SELECTION) 

Clark sounds played through VIsation FRS7
Benedini sounds played through VIsation FRS8


Will post video once its morning, the sound is TOO LOUD, it'll drown out all other tanks in the battlefield ;)

cheers,
Rey

Diverfrost

  • Guest
Re: Benedini TBS mini-Clark TK20
« Reply #1 on: February 14, 2013, 11:41:35 PM »
That's great work Doc!

looks like you are a wiz with the electronics  ;D ;D

reyemmanuel

  • Guest
Re: Benedini TBS mini-Clark TK20
« Reply #2 on: February 15, 2013, 12:20:26 AM »
thanks mate, just starting to get real goodies long-deserved for my armour.

The sound is so good that the wife drove it much, much often doing engine revs. To the point the Tam Gen1 TU broke  :(-no drive videos for now. On the brighter side, this Leo1 can now have impact's TU3 and permax480  ;)<----Commander in Chief sanctioned :D


reyemmanuel

  • Guest
Re: Benedini TBS mini-Clark TK20E-T1
« Reply #3 on: February 16, 2013, 09:06:57 PM »

Test 1: battlearmorrc pre-load engine sound and revs with turnigy 9x

Tamiya Leopard 1A4 Benedini TBS Mini Clark TK20E Turnigy 9x Visaton FRS8 and 7 Test 1

Offline YHR

  • Jr. Member
  • **
  • Posts: 54
  • Country: ca
Re: Benedini TBS mini-Clark TK20E-T1
« Reply #4 on: February 16, 2013, 11:50:18 PM »
Nice work on the Leo. 

reyemmanuel

  • Guest
Re: Benedini TBS mini-Clark TK20E-T1
« Reply #5 on: February 16, 2013, 11:59:54 PM »
Thanks Dan and welcome to the forum.

Will do a bit of mucking around to get my Turnigy 3 switch (F.MODE) working and revs from TRN switch.

As I will do a DBC3-Benedini combo for my HE Abrams and Leo2, kindly let me know when the DBC3 is available...I 'll start a post on DBC3-Benedini once i get hold of 1.

cheers,Rey

Offline Jagdpanther

  • Newbie
  • *
  • Posts: 1
Re: Benedini TBS mini-Clark TK20E-T1
« Reply #6 on: May 13, 2014, 05:29:31 PM »
Hello! I am a new member of the forum, and I need your help! I have a TBS mini and Clark tk 22 mainboard with Turnigy 9x, and would like to make the necessary connections. My TBS mini (indirect soundselection) (Prop3) If possible, please you the exact wiring diagram of all the wires. Sorry for my english! Regards, Marcin from Poland.

Offline YHR

  • Jr. Member
  • **
  • Posts: 54
  • Country: ca
Re: Benedini TBS mini-Clark TK20E-T1
« Reply #7 on: May 15, 2014, 02:06:23 PM »
Hi

The prop 3 is not used with the TK 20 unless you already have  built yourself a decoder.

The best thing to do is have the TBS look after the main engine sounds and then let the Clark look after the rest of the sounds.

Here is link to my web page for this specific thing

http://battlearmorrc.weebly.com/benediniclark-hook-up-diagram.html



And here is the link to the home page

http://battlearmorrc.weebly.com/