New Page 1

Author Topic: Clark tk KV test drive. Not so smooth ( video)  (Read 1056 times)

Offline maxmekker

  • Able to Hull Down
  • *****
  • Posts: 703
  • Country: no
Clark tk KV test drive. Not so smooth ( video)
« on: April 12, 2014, 08:39:43 AM »
Allright folks. what ya think . can it be the motors ore the gearboxes in the kv ( 3/1)

 I feel the kv to be somewhat 'jerky'

 the 'turning' Clip all endpoints are at 100%. first section of the clip when driving back and forth I have all to 60%.(thr + steering) Same settings in the tiger, just swopped all into it ( uses black motors + 3/1 ) . But it drives so much more smooth. And at the end tamiya..no comments needed . So can it be the motors, gerboxes ore what ?
 radio 9x With tanker

(sorry about the sound at first)



Diverfrost

  • Guest
Re: Clark tk KV test drive. Not so smooth ( video)
« Reply #1 on: April 12, 2014, 08:41:43 PM »
might need some black cans in her mate.....380's

Reaper332

  • Guest
Re: Clark tk KV test drive. Not so smooth ( video)
« Reply #2 on: April 12, 2014, 09:02:04 PM »
Hey Mate what tracks are you using on the KV as it looked like they were riding up on the sprocket teeth quite a bit.....??? That wouldn't help with the way it drives.

Cheers Ken

Offline maxmekker

  • Able to Hull Down
  • *****
  • Posts: 703
  • Country: no
Re: Clark tk KV test drive. Not so smooth ( video)
« Reply #3 on: April 13, 2014, 03:12:38 AM »
I have a set of black cans , will try to swopp the standar motors for those, same tu's in the tiger. but as you might see, it has black cans.

the tracks are standar hl plastick , riding on the metal sprockets, issue With fitting I know.

Reaper332

  • Guest
Re: Clark tk KV test drive. Not so smooth ( video)
« Reply #4 on: April 13, 2014, 07:34:46 AM »
If thats a Asiatam lower hull then H/L tracks wont fit but Tamiya and Impact tracks fit perfectly.... ;) ;) I would be surprised if it was the motors but you never know I guess.

Cheers Ken

Offline maxmekker

  • Able to Hull Down
  • *****
  • Posts: 703
  • Country: no
Re: Clark tk KV test drive. Not so smooth ( video)
« Reply #5 on: April 14, 2014, 03:09:01 AM »
latest video's on this matter




Offline maxmekker

  • Able to Hull Down
  • *****
  • Posts: 703
  • Country: no
Re: Clark tk KV test drive. Not so smooth ( video)
« Reply #6 on: April 14, 2014, 03:10:26 AM »
thanks for the info on the tracks reaper, yes this is the full metal lower hull. So if I find some tamiya tracks on ebay they will og right on then, good to know

here is what I managed to do last night