New Page 1

Author Topic: Stug 3 G (posted January 16, 2011)  (Read 2203 times)

claudel

  • Guest
Stug 3 G (posted January 16, 2011)
« on: April 03, 2013, 12:20:21 AM »
The model chosen for the upgrade is an early HL Stug 3 IR. This model is very successful, in detail
The model is made entirely of plastic, are exceptional gearboxes and gun barrel, which are metal

claudel

  • Guest
Re: Stug 3 G
« Reply #1 on: April 03, 2013, 12:22:05 AM »
First stage

claudel

  • Guest
Re: Stug 3 G
« Reply #2 on: April 03, 2013, 12:24:55 AM »
Additional armor, face

claudel

  • Guest
Re: Stug 3 G
« Reply #3 on: April 03, 2013, 12:26:06 AM »
Metal spare wheel with rubber

bradbmx

  • Guest
Re: Stug 3 G
« Reply #4 on: April 03, 2013, 12:26:48 AM »
Keep the pics comming.  ;)

Offline Snaps

  • Sr. Member
  • ****
  • Posts: 454
  • Country: au
  • Shot over......shot out
Re: Stug 3 G
« Reply #5 on: April 03, 2013, 12:27:08 AM »
Keep them coming, its a future projrct for me.

Snaps
A division aint enough HL Pzrs IIIx2, IV, Vx2, VI Early,Mid, Late, KV I, Pershingx2, Stug III, JagdPanther, Matorro Jagdtiger, Sturmtiger, Sherman, WSN T34x2, Profiline KV-85, Tamiya Kubelwagen, Leopard A4, Eduard Schwimmwagen, Kirin....Verlinden.......Dragon 1/6 Jeep with 37mm A/T

claudel

  • Guest
Re: Stug 3 G
« Reply #6 on: April 03, 2013, 12:28:04 AM »
Metal muzzle brake

claudel

  • Guest
Re: Stug 3 G
« Reply #7 on: April 03, 2013, 12:29:37 AM »
Air Intrake boxes and photo-etch grills

claudel

  • Guest
Re: Stug 3 G
« Reply #8 on: April 03, 2013, 12:30:22 AM »
To remove the excess glue will hone a very fine abrasive paper

claudel

  • Guest
Re: Stug 3 G
« Reply #9 on: April 03, 2013, 12:31:13 AM »
Asiatam smoke dischargers

claudel

  • Guest
Re: Stug 3 G
« Reply #10 on: April 03, 2013, 12:32:15 AM »
Metal exhaust

Offline Snaps

  • Sr. Member
  • ****
  • Posts: 454
  • Country: au
  • Shot over......shot out
Re: Stug 3 G
« Reply #11 on: April 03, 2013, 12:32:41 AM »
More work for me to do sigh..... ;D

I love it keep em coming Claudel.

Snaps
A division aint enough HL Pzrs IIIx2, IV, Vx2, VI Early,Mid, Late, KV I, Pershingx2, Stug III, JagdPanther, Matorro Jagdtiger, Sturmtiger, Sherman, WSN T34x2, Profiline KV-85, Tamiya Kubelwagen, Leopard A4, Eduard Schwimmwagen, Kirin....Verlinden.......Dragon 1/6 Jeep with 37mm A/T

Offline philipat

  • Full Member
  • ***
  • Posts: 169
  • Country: us
  • Bulldog Panzer
Re: Stug 3 G
« Reply #12 on: April 03, 2013, 12:33:12 AM »
Nice work!   ;D

I'm working on some of the same upgrades you're doing, particularly the headlights, metal exhaust and metal hull.  But, I'm doing a PzIII M.  My questions for you:

1)  Where did you get the headlight?  It looks like the correct Bosch with base and everything.

2)  Where did you get the metal muzzle break and do you think it would support airsoft?

3)  Do you have any more pictures of the installation of the metal exhaust?  I'm trying to determine if I'm supposed to try to squeeze the resin part inside the frame of the rear part, or if it is supposed to overlap the edges.

Thanks.

claudel

  • Guest
Re: Stug 3 G
« Reply #13 on: April 03, 2013, 12:33:39 AM »

claudel

  • Guest
Re: Stug 3 G
« Reply #14 on: April 03, 2013, 12:37:23 AM »
The matal muzzle break is for IR version

claudel

  • Guest
Re: Stug 3 G
« Reply #15 on: April 03, 2013, 12:37:59 AM »
To mount the brake had to cut the thread of the end, as was the old plastic recoil brake and tap the barrel.
 I changed to a lesser light, and to secure the brake I used a glue

claudel

  • Guest
Re: Stug 3 G
« Reply #16 on: April 03, 2013, 12:39:36 AM »
Protective Shields "Schurzen"

Offline kamaz

  • Jr. Member
  • **
  • Posts: 79
  • Country: hr
Re: Stug 3 G
« Reply #17 on: April 03, 2013, 12:40:54 AM »
I notieced that you bought ˝s˝ granade launchers.
Here is how they look on Tiger I that I have made...

Hope that this gives you an idea about how to finish them. ;)
Zdravi i veseli bili!

Offline philipat

  • Full Member
  • ***
  • Posts: 169
  • Country: us
  • Bulldog Panzer

claudel

  • Guest
Re: Stug 3 G
« Reply #19 on: April 03, 2013, 12:42:38 AM »
Tank Modellbau vent for citadel,end 2 antenna

claudel

  • Guest
Re: Stug 3 G
« Reply #20 on: April 03, 2013, 12:43:59 AM »
Headlight AA

claudel

  • Guest
Re: Stug 3 G
« Reply #21 on: April 03, 2013, 12:44:46 AM »
New Stronger metal gearboxes for stug3/panzer3